點擊圖片查看大圖
| Compare | Contact Us | |
| NORYL GTX? Resin | ||
| Grades |
De |
|
| GTX4610 |
PPE+PA, Glass, Datasheet Product Data: Auto Data: |
|
| GTX673 |
PPE+PA, Conductive, Datasheet Product Data: Auto Data: |
|
| GTX678 |
PPE+PA, Flame Retardant, Conductive, Heat Stabilized, Impact Modified, Nonhalogenated, Datasheet Product Data: Auto Data: |
|
| GTX8730 |
PPE+PA, Glass, Conductive, Datasheet Product Data: Auto Data: |
|
| GTX902D |
NORYL GTX902D is a GTX902E with smaller shaped pellets. Datasheet Product Data: Auto Data: |
|
| GTX975 |
18% mineral filled conductive NORYL GTX. Datasheet Product Data: Auto Data: |
|
| GTX989 |
PPE+PA, Conductive, High Impact, Datasheet Product Data: Auto Data: Auto Specification |
|
| NX0031 |
PPE+PA, conductive with high impact Datasheet Product Data: Auto Data: |
|
NORYL GTX ? Resin GTX678 |
SI | | British | | Metric | Americas: COMMERCIAL |
| NORYL GTX678 resin is a high performance blend of PPE/PA that exhibits an excellent balance on non-halogenated flame retardance, conductivity, ductility, and high-heat resistance. This grade can be electro-statically painted or powder coated without the need for a conductive primer. |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 590 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 530 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, yld, Type I, 50 mm/min | 7 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 12 | % | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 29500 | kgf/cm2 | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 960 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 26500 | kgf/cm2 | ASTM D 790 | |
| Tensile Stress, yield, 50 mm/min | 58 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 52 | MPa | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 7 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 12 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 2900 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 95 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2600 | MPa | ISO 178 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 10 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -30°C | 7 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Total Energy, 23°C | 611 | cm-kgf | ASTM D 3763 | |
| Izod Impact, notched 80*10*4 +23°C | 10 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -30°C | 7 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 12 | kJ/m2 | ISO 179/1eA | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 198 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 195 | °C | ASTM D 648 | |
| CTE, -40°C to 40°C, flow | 7.8E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 40°C, xflow | 8.E-05 | 1/°C | ASTM E 831 | |
| Specific Heat | 1.4 | J/g-°C | ASTM C 351 | |
| Thermal Conductivity | 0.2 | W/m-°C | ASTM C 177 | |
| CTE, 23°C to 60°C, flow | 8.3E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 60°C, xflow | 8.5E-05 | 1/°C | ISO 11359-2 | |
| Ball Pressure Test, 125°C +/- 2°C | PASS | - | IEC 60695-10-2 | |
| Vicat Softening Temp, Rate B/50 | 197 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 195 | °C | ISO 306 | |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 191 | °C | ISO 75/Bf | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.12 | - | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 1.3 - 1.5 | % | SABIC Method | |
| Melt Flow Rate, 300°C/5.0 kgf | 7.8 | g/10 min | ASTM D 1238 | |
| Density | 1.12 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/sat) | 4 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 0.5 | % | ISO 62 | |
| Melt Volume Rate, MVR at 300°C/5.0 kg | 7 | cm3/10 min | ISO 1133 | |
| ELECTRICAL | Value | Unit | Standard | |
| Volume Resistivity | 4.E+03 | Ohm-cm | ASTM D 257 | |
| FLAME CHARACTERISTICS | Value | Unit | Standard | |
| UL Compliant, 94V-1 Flame Class Rating (3)(4) | 1.5 | mm | UL 94 by SABIC-IP | |
| UL Compliant, 94V-0 Flame Class Rating (3)(4) | 2 | mm | UL 94 by SABIC-IP | |
| UL Compliant, 94-5VA Rating (3)(4) | 2 | mm | UL 94 by SABIC-IP | |
| UL Compliant, 94-5VB Rating (3)(4) | 2 | mm | UL 94 by SABIC-IP | |
| Glow Wire Flammability Index 960°C, passes at | 2 | mm | IEC 60695-2-12 | |
| Glow Wire Ignitability Temperature, 1.0 mm | 800 | °C | IEC 60695-2-13 | |
| Source GMD, last updated:2006/06/29 |
| Processing |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們?cè)瓌t上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請?jiān)敿?xì)核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換